ITE HVR 300 & ITE HVR 380

The HVR 300 and HVR 380 hydro vacuum cyclones are mechanical components with a cylindrical to conical shape that are used for separating fine particles from suspensions by means of centrifugal force. In the process, the size of particles filtered out during the separation process is subject to the size of the cyclone, particle size, suspension viscosity as well as the pressure generated by the cyclone. Inside the hydro vacuum cyclone, there is a negative pressure that may be adjusted via a pressure line at the cyclone overflow. In turn, this enables the operator to adjust the moisture content of the material discharged.

Properties and functions:

	Enhanced protection against abrasion ensured by a coating of natural rubber which is applied to the inner wall of the hydro vacuum cyclone
	Manometer for measuring the pressure inside the hydro vacuum cyclone (measurement range 0 – 2 bar)
	Pressure line equipped with a valve for adjusting pressure inside the hydro vacuum cyclone
	Easy and safe handling
	Easy to replace and cost-efficient

Functioning

Inside the hydro vacuum cyclone, the suspension entering the device is stirred and set into a circular motion. In turn, this gives rise to centrifugal forces which get stronger towards the bottom of the hydro vacuum cyclone due to its conical design. This way, the small solid particles in the suspension are tossed against the inner wall of the hydro vacuum cyclone, separated at a characteristic cut-point and removed at the cyclone underflow. The purified liquid containing particles smaller than the cut-point will leave the hydro vacuum cyclone via the cyclone overflow.

Technical specifications

ITE HVR 300

	Size of cyclones: 12 inches (305 mm)
	Operating pressure: 0.8 – 1.2 bar
	Throughput: 60 - 80 m3/h
	Cut-point (d50): 45 µm

ITE HVR 380

	Size of cyclones: 15 inches (381 mm)
	Operating pressure: 0.8 – 1.2 bar
	Throughput: 102 - 148 m3/h
	Cut-point (d50): 45 µm

Transport dimensions

ITE HVR 300

	Length 1: 2363 mm
	Length 2: 1626 mm
	Width 1: 762 mm
	Width 2: 254 mm
	Weight: ca. 91 kg

ITE HVR 380

	Length 1: 2642 mm
	Length 2: 1854 mm
	Width 1: 762 mm
	Width 2: 305 mm
	Weight: ca. 142 kg

<< back